Your cart
There are no more items in your cart
Microdialys Perstaltic Pump
The MAB 20 Microdialysis Pumps is a peristaltic pump specified for low flow rates.
Two different pump tubings allow for flow rates between 0,1 µl/min and 30 µl/min. The MAB 20 pump is available with 2 channels. An additional application for this pump is to use it with higher cut-off probes. Pre-calibrated tubing kits enable accurate flow rate settings although on site calibration, for further accuracy, is recommended. The pump tubing come with a given V-value which reflects the flow rate at 99,9% of pump speed. For lower flow rates simply set the percentage of speed to get the flow rate desired.
The PEEK cannulas on the pump tubings fit directly to FEP tubing using blue or red tubing adapters. All pump tubing kits are made from santopren and can be autoclaved, if desired. Other advantages of the peristaltic pump are that there is no limit to the perfusion media reservoir and that a change of perfusion media simply means moving the pump inlet tubing to a different reservoir. The MAB 20 is linear in the range 1 to 99,9 % of pump speed. Two different tubing kit is available; the 0,12 mm ID tubing delivers app. 0,1 - 10,0 µl/min and the 0,25 mm ID tubing delivers app. 0,3 - 30 µl/min.
Tap to zoom
